Sunday, March 10, 2019
Comparing and Contrasting the Baroque and Classical Period in Music
Both the fancy and the Classical period in harmony produced great household name composers, such as Johannes Sebastian Bach and George Handel in the churrigueresco Era, and Wolfgang Amadeus Mozart and Josef Haydn in the Classical catch. To many listeners who are vaguely acquainted(predicate) with classical music, there is not much difference among these ii musical periods.However, to avid listeners, the complex differences in style, t whizz, and structure among these 2 eras are too great to be ignored. Let us realise first at the Baroque close.This period is characterized by a surd contrapuntal style and a heavy reliance on polyphony, that is, on many different voices layered on top of one another. Baroque melodies usually do not follow a strict, symmetrical battle array (e. g. quadruplet-measure expressions, where there is a cadence every four measures), but kinda work with radicals or motives that are continuously spun out throughout the piece. This proficiency of spinning out motives is anticipateed by its German name, Fortspinnung, and is characterized by continuous motion, lopsided accent lengths, mellisonant or harmonic sequences, key changes, and phrase omissions (Theory and compend 386).This technique very much gives listeners a feeling of excitement, rendering chord progressions and melodic sequences somewhat unpredictable. Perhaps the greatest composer to come out of the Baroque Period is Johannes Sebastian Bach. His music is filled with complex melodies which work and re-work the themes stated at the germ of his pieces. In contrast, the Classical Period of music is characterized more or little by a strict, symmetrical structure in the music.Phrases are often divided every four or eight measures, with these phrases adhering to a two part structure antecedent and consequent phrases. The antecedent phrase, usually four or eight measures, ends in a half cadence, thereby commerce for a harmonic resolution the consequent phrase, usually of equal length, answers this call by ending in a full cadence (i. e. in the tonic), resolving the tension presented in the antecedent phrase. The biggest difference then between Baroque and Classical Period music, in terms of style, is the difference in phrase structure.Although both the Baroque and Classical Period share connatural phrase endings (full or plagal cadences), the Baroque does not usually follow the antecedent-consequent phrase structure that characterizes so much of the music in the Classical Period. The first composer whose work best exemplifies the Classical Period is Wolfgang Mozart. His concertos, sonatas, and symphonies are filled with antecedent-consequent phrase structures that have been influential in music, from the Romantic Period to contemporary general music.Given this difference in style, we also see differences in the forms of compositions. Because of the differences in instruments (e. g. Baroque Period is characterized by the use of the har psichord, where Classical Period is popular for its general use of the piano), different forms of music were very popular for each period. In the Baroque Period, the popular forms were Concerti Grossi (full orchestra with many soloists), Fugues (counterpoint style with multiple voices claiming the same melodies), and Suites (four movement pieces written for a select number of instrumentalists).And in the Classical Period, composers stuck to composing Concertos (three movement pieces for orchestra and a solo instrument), Symphonies (four movement orchestral pieces), and Sonatas (three movement pieces for one or more solo instruments). Most of the pieces in the Classical Period are written in Sonata-form, which divides the piece into three sections exposition, which presents the main theme development, which develops the main theme, varying it in complex ways and recapitulation, which returns back to the main theme.Both periods of music produced rich pieces which are still listene d to and played today, and yet the differences between these two periods, though somewhat subtle, provide a wide err of listening experiences for the classically tuned ear.Works Cited and BibliographyJane Piper Clendinning and Elizabeth West Marvin. The Musicians come about to Theory and Analysis. (New York W. W. Norton & Company, Inc. , 2005)Donald Jay Grout. A History of Western Music. (New York W. W. Norton & Company, Inc. , 1973).Charles Rosen. The Classical Style. (New York W. W. Norton & Company, Inc. , 1972).
Transitional Leadership
mutation Leadership Managing Change In Your governance in todays deregulating and increasingly competitive personal line of credit environment, organisational kind is becoming inevitable. Todays successful organizations be experiencing converts in the atomic number 18as of engine room, serve well re engineering, mergers, and organisational restructuring in order to confront competitive. However, although these aras impact employees at all levels of the company, senior management often overshadows this fact.Therefore, it is haughty that company management scans the impact of organizational alteration on employees and manages these cause accordingly. By doing so, organizational loss leading minimize the negative impact interpolate has on productivity and performance. This paper leave alone focus on the practise of successfully leading employees done significant permutes brought about by recent technologies and process diverges and testament focus on three a ras of innovation leadership. First, the raillery conveys the impact that counter transform has on an organizations employees.Second, an overview and discussion of regeneration leadership and its use of goods and services in managing organizational flip-flop is given. Finally, ship canal to in effect manage employees through these re performances to miscellany is presented. By brain the elements of organizational change and its impact on employees as sanitary as the appropriate government agencys of managing sight through these revolutions, organizational leaders will be let on prep ard to address the challenges that be innate in major line of descent passings. The Impact of Change on People Frequently, information technology professionals overlook the impacts of technology changes on raft.Al nigh any change to technology will sustain an impact on trading processes, which will directly impact the day-after-day patronages of individual employees. As a result, chan ges to technology require attention to the impacts that they harbour on both process and sight. The practice of Organizational Change counseling (OCM) focuses on ensuring that the tribe side of change is addressed appropriately. OCM is the process of aline the organizations tidy sum and culture with changes in business strategy, organizational structure, technology, and business processes.OCM is important because, at the to the highest degree rudimentary level, all change involves some degree of use upiness whether it is loss of stability, loss of expertise, loss of relationships, or loss of understanding. People often try to avoid the experience of loss by resisting change. Resistance can come in different forms and be expressed with different emotions such as anger, frustration, fear, etc. Due to the end for change to elicit an emotional response, any large-scale change world-class will likely remove the employees focus from the business to transformation-related issue s.This shift in focus will likely disrupt the productivity of the business. Many technology implementation/business process redesign efforts fail because they overlook the impacts that change will cause on the raft in the organization. An organization that ignores the magnificence of OCM could experience the following risks increased resistance to new technology, decreased type and customer service, high turnover and absenteeism, vexedy recruiting and retaining high performers, and damaged informal and external brand equity.On the some other hand, an organization that implements a technology/business process transformation with integrated OCM will experience the following benefits identification of the business transformation objectives, higher return on technology investments, safe concuring of high performers, maintained and improved productivity, improved employee satisfaction and morale, and increased discretionary effort. Transition Leadership Given the impact that ch ange has on employees, it is bring-cut that managers must learn to proactively manage employees through the many changes that are inherent in or so organizations.In geospatial environments, managers and other signalize stakeh sr.(a)ers often focus on technological and process changes that will make their businesses competitive in the twenty- starting line century. These issues are important, but the changes ultimately will not be enforced successfully without the cooperation of employees. Only through effective transformation leadership are employees able to effectively cope with and accept the changes they are presented with. Ten Characteristics of strong Transition Leaders The role of transition leader is an often unmarked but important aspect of management.There are several characteristics that make up a good transition leader. Here we identify the main characteristics that are aimed in a successful transition leader. In general, there are 10 characteristics of effecti ve transition leaders Gains support from and authority of others. Change is not accepted and work cannot be done without the buy-in of nominate stakeholders. For this reason, it is imperative that transition leaders gain the support and confidence of other key employees in the organization. pick ups and collaborates effectively.No matter how good a manager is, people will not follow without a sense of ownership in the organization. One of the key ways to secure this ownership and trust in employees is through listening and collaboration. Takes accountability. As with any effective manager, successful transition leaders take accountability for their own work as well as that of the entire organization that he or she manages. Provides constructive feedback to others. Transition leaders also provide constructive feedback to employees and colleagues. This type of feedback enables employees to be to a greater extent than effective in adapting to and accepting change. Builds relati onships with customers, peers, and befuddle team members. Effective transition leaders are also successful in building relationships with customers, peers, and digest members. This alliance building enables leaders to effectively delegate and gain the buy-in from key imagings, which further enables change in spite of appearance the organization. Inspires and motivates. In order to manage change effectively in the organization, transition leaders choose to present providential employees and stakeholders. Communicates openly, early, and often.Since change is such a complex and fearsome idea for well-nigh people, it is important for transition leaders to open the flow of communication. This holds true on a day-to-day basis as well (and especially) during times of change. Provides clear direction. In order for the organization to get to where it needs to be, employees and stakeholders have to understand where they are and where the organization is going. With this in mind, tr ansition leaders need to clear communicate the organizations vision and goals to stakeholders and clarify individual roles and responsibilities in spite of appearance that context. Models the way for the team.Successful transition leaders do more than just delegate work and build relationships. They also lead by example in order to build credibility and trust. Creates opportunities for small wins. The change involved in large scale and complex IT implementations often appears insurmountable to employees. Therefore, it is important to a great deal compensate and recognize team members to help boost morale and to keep change initiatives from failing due to a burned-out staff. These 10 characteristics of a good transition leader ensure that change is implemented successfully and that major obstacles and resistances to change are minimized.The Roles of Transition Leaders In growth to these characteristics, transition leaders must play a number of roles in order for organizational changes to be successful. Since transition leaders are trustworthy for directly influencing the outcome of IT and process change implementations, successful change requires that transition leaders assume different roles. In general, transition leaders have four primary roles catalyst, system and process helper, solution giver/gatherer, and resource physical contacter. The first and arguably the most difficult role that a transition leader faces is that of Catalyst.While many organizations are content with the status quo, it is the transition leaders responsibility to create and communicate the need for change within the business. This involves instilling a sense of urgency and purpose for the change and overcoming organizational inertia. In addition, this role entails acknowledging areas of resistance and addressing them appropriately. Change will not slide by successfully if key stakeholders do not realize and understand the need for change, and it is the responsibility of tran sition leaders to make this need evident.The second role of a transition leader is that of a System and Process Helper. at a time the need for change has been recognized by the organization and change initiatives are created, it is the transition leaders responsibility to ensure that the organization is assimilated into the process and IT changes that ensue. This involves understanding the process and IT changes, the impact these changes have on jobs and policies, and effectively communication these changes to the individuals impacted. The tasks performed by the System and Process Helper helps permeate the required change throughout the organization.The third role that a transition leader plays is that of resolvent Giver and Gatherer. This role is needed to identify and resolve issues that may hinder the success of the implemented change. In particular, the Solution Giver and Gatherer will promote the use of an issues resolution mechanism, provide solutions that benefit the enti re organization, and hang in the development and implementation of solutions. In addition, an important element is the need for leaders to listen to suggestions and provide feedback and recognition when appropriate.As discussed above, effective transition leaders communicate, provide feedback, and celebrate small wins, which is important to inspiring and motivating project teams. The concluding role of a successful transition leader is that of imaginativeness Linker. This role involves the more traditional management like delegating tasks, and most experienced managers are capable in this arena. In short, the Resource Linker brings people and resources together, recognizes resource constraints, leverages skills and resources across site locations, and acts as a communications link between resources.This role is important, but it is the three roles described above that most managers overlook when implementing change initiatives. How To Manage People Through Change When incorporati ng change in an organization, it is useful for transition leaders to understand how change impacts people and how to minimize the negative reactions to change. All successful change initiatives follow a similar pattern or sequence. The first step consists of unfreezing the current way of doing things. This is the phase in the project where the burning platform for change is recognize and the vision for a new way of operating is created.The second phase of change begins when it is time to begin energizing the workforce by involving more and more people in the change process so as to begin building ownership over the final outcome. This is also the token where it is critical to identify and secure early project wins. Ensuring that the right resources are provided for achieving early milestones will ensure that the project is perceived as a success. The third phase of the change process consists of building the infrastructure (i. e. , job and organization designs) required to make t he change successful.For example, if the technology changes are think to automate processes that were previously done manually, changes to job designs will be required. The final phase consists of a series of activities aimed at measuring results and identifying lingering gaps and issues that need to be addressed in order to achieve the projects intended benefits. While the above phases outline the sequence that change initiatives commonly follow, there are three corresponding phases that describe the psychological experiences that people have when affected by change. These come from William Bridges book Managing Transitions (1991).The first phase is called Letting Go. This is the time when employees will begin to understand that things are changing, and that in the near future they will be challenged with letting go of the old way of doing things. This may include letting go of old ways of working, relationships, feelings of competence, etc. The second psychological phase, the N eutral Zone is the difficult period when the work is done to implement change and the transition from the old way to the new way begins. Trying to handle implementation and ratio the transitions may make this period the most difficult period of change to manage.The last psychological phase is what Bridges refers to as the New Beginning. This occurs when changes have been fully implemented and expectations for people to change the way they work are realized. Each of the phases described above consist of many people-related challenges, and there are many specific strategies for helping to manage people through these phases. some(prenominal) of the important critical success factors for managing change are the following recognize potential barriers or risk factors that will inhibit success, and create action plans to address them appropriately. Use written and face-to-face communication to help people understand the what, why, and how of change. Identify opportunities to involve large numbers of employees in the change process research shows that there is a correlation between closeness and commitment. Seek to understand and manage individual and team level resistance. Listen to your employees, acknowledge their losses, show empathy, strive to reduce their stress levels. Recognize and reward behaviors that support achievement of intended goals. Systematically analyze the impacts change will have on corporate policies, individual jobs, and organizational structure. Ensure that employees nonplus sufficient training and the other on-the-job resources necessary to raise peoples level of confidence. By addressing and incorporating these success factors into their management toolkits, effective transition leaders greatly increase the likelihood that their change initiatives will be successful. Conclusion Transition leadership, while often viewed as a loony or touchy feely issue not appropriate to geospatial managers, is clearly a relevant and critical issue to managing the changes that are inherent in organizations today.Even the most robust GIS package with the highest benefits potential is meaningless if employees and key stakeholders do not effectively accept and adapt the changes to their everyday lives. By embracing the understanding of the impact that change has on employees, the role of transition leaders, and how to manage employees through change, managers will ensure that the changes stick and the anticipated benefits are realized.
Saturday, March 9, 2019
Mannerist Portraits of the 16th Century
The sixteenth century was a period of intense governmental and military. The 1500s were also a period of religious change. The Italian painter Parmigianino was a pioneer of the mannerist style, which his work shows an essentially decorative emphasis and accomplished smoothness. They had a nickname for Parmigianino which was little man from Parma. At the age of 19 Parmigianino was mission to frescoes for the Parma Cathedral. Now the painting that Ive chose from the Mannerist portraits of the 16th is Parmigianinos bloody shame and shaver with Angels, which is also Madonna of the Long Neck.Now the reason they call it Madonna of the colossal Neck is because how long her issue is in the painting. The Madonna, in particular, has an elongated neck and tilted head. Her movement flows into the spatial twist of the torso and legs, Mary dress, in contrast to the usual blue and red. Parmigianinos painting exemplifies the elongation that the Mannerists gave their figures. They do the stretc hing the human body in some ways the Mannerist artists seemed to be ahead of everyone else. This is one of the most popular subjects in Christian art.It has been multicolour by hundreds of painters over the centuries to be placed in a church building or chapel as an altarpiece. Some of the effects that are in the find out is the faces are more realistic and not idealized. The baby deliverer is less of a small man and more interchangeable a child. An attempt at creating depth has been attempted to place two emphasise angels and through the use of linear perspective in the throne. Modeling is all the way visible as the light source is coming from the left of the painting.Madonna shroud has larger and more naturalistic folds that shape her body. The way Madonna take care had her head tilted and how her hand was on her chest in the picture was like she was in the royal family or had royal blood, and how the mannerism had a different style of painting the baby was bigger than the normal coat baby. In the picture is see five angels awaiting at Madonna and the baby. They use Oil on panel, and if you pay attention to the floor in that location is a little man looking away from a scroll.As you tail see that the painting is taking place in a room, except in the background you can see a background of outside, and they utilize like a brownish colors to make it look like the sun is going down or coming up. If you look at Madonna and the angels cheeks, they have all have red blush on their cheeks. If you look close you can see that Madonnas yield is sticking out a little because the scene of the painting makes it look like she just had a baby.
Poetry Analysis of “Introduction to Poetry”
Poetry analysis of Introduction to Poetry The poetry Introduction to Poetry is by billystick collins, an English poet, and it is about how teachers oftentimes force students to over-analyze poetry and to try decipher every possible significance portrayed finishedout the poetry rather than allowing the students to form their own version of the numbers based on their own experiences. Throughout the poem, a issuance of literary devices argon employ. For example or press an ear against its salt away.Using this parable, truncheon Collins is canvass the body of a poem to the bee stash away of a bee. The hive of a bee appears to be something dangerous and unknown, just equivalent a new poem, never before seen, with which adept is unfamiliar. Using this metaphor, Billy Collins is suggesting that wholeness should get an dexterity of the poem by study it just as one would get a sense of energy by pressing ones ear to a hive of a bee. The nature of a bee is particularly busy a nd bees are creatures that be to be constantly on the go.In this way, Billy Collins is suggesting that whilst the reader is digesting the poem, he or she should constantly be feeling the poem and be busily analyzing it. By comparing the poem to a hive, he is also byword that, like a hive, a poem is full of intense life. The characteristics divided by both the two metaphoric images are very similar, thus, it is an effectual comparison. The poem is utilely individualified once again through the nisuss or straits inside a poems room.Here, Billy Collins suggests that the poems room, in other word, its body or what the poem contains, like a room of a person, defines the poem. single can curb a lot about another by viewing his or her room. Like a room too, which is private and should not be invaded, one should not invade a poem in the sense that one should not analyze it too heavily. Another rough-and-ready metaphor, I requirement them to water-ski across the surface of the po em is used in this poem.Billy Collins is comparing water-skiing across the surface of the water to the way in which he believes poems should be read which is gently and merely on the surface. This is an effective metaphor as water-skiing brings about a great sense of ecstasy and is fun, just as read a poem in Billy Collins opinion should be. The use of onomatopoeic devices and onomatopoeic words are abundant in this poem. For instance, I say drop a black eye into a poem is a line whereby the word drop, a very onomatopoeic word, effectively suggests that the reader of a poem must gently analyze a poem.This is portrayed through the gentle p sound of the word and this is therefore effective as the reader gets a sense of the gentleness Billy Collins wishes his readers had when it comes to analyzing poetry. The fact that enjambment is used throughout the poem such as in the lines, like a colour slide or press an ear against its hive portrays a lack of structure and therefore emphas izes the initial enjoyment one feels when reading a poem before the chore of analyzing it departs.This is also emphasized through the fact that the poem is a free verse poem. The poem suddenly becomes much darker in the last stanza and a Billy Collins explains how teachers, students or general readers of poetry torture a poem by being what he believes is cruelly analytical. He says, all they want to do is compel the poem to a chair with rope and torture a acknowledgment out of it. Here, the poem is being personified yet again and this brings about an well-nigh human connection between the reader and the poem.This use of personification is effective as it makes the reader feel somewhat guilty for over-analyzing a poem. This line is also a metaphor. The way in which one analyzes a poem is being compared to a victim being tied down to a chair and having a confession tortured out of them. This metaphor is effective as, like a rope pinning down a person would be very restrictive, ov er-analyzing a poem narrows the focus and constricts it from simply allowing it to be. They begin beating it with a hose to find out what it really centre. This is a continuation of the metaphor and is highly effective as it potently portrays a sense of inhumanity through the choice of hose as an object with which to torture as opposed to a typical weapon. One can just imagine how painful this would be and again, forces the reader to approximately empathize with the poem. The poem sends a powerful essence to its readers and is significantly lapse in its message to not delve too deep into the message of a poem.
Friday, March 8, 2019
Nur Jahan
Begum Nur Jahan (Persian, Urdu ) (alternative spelling Noor Jahan, Nur Jehan, Nor Jahan, etc. ) (31 whitethorn 157717 December 1645), in like manner k like a shotn as Mehr-un-Nisaa, was Empress of the Mughal Empire that covered a lot of the Indian subcontinent. She was an aunt of Empress Mumtaz Mahal, Emperor Shah Jahans married woman for whom the Taj Mahal was make. Begum Nur Jahan was the twentieth and favourite wife of Mughal Emperor Jahangir, who was her second husband. The story of the couples infatuation for each other and the family relationship that abided between them is the stuff of many (often apocryphal) legends.She remains historically significant for the see-through amount of imperial authority she wielded the true power behind the thr hotshot, as Jehangir was battling serious addictions to alcohol and opium throughout her reign and is known as iodin of the most powerful women who ruled India with an iron fist. Contents hide 1 bestow 2 Marriage with Sher Afgh an 3 Marriage with Jahangir 4 Mughal empress 5 Death 6 Nur Jahan in pop culture 7 suck up also 8 References 9 Further reading 10 immaterial links editBirthKandahar (Candahar), Nur Jahans place of birth, is now southern Afghanistan Nur Jahan was born on May 31 1577 in Kandahar (now in Afghanistan) to traveling Persian, Mirza Ghiyas Beg from Tehran (now in Iran). Her Persian-born grandfather, who was in the service of Shah Tahmasp I, died in Yazd, laden with honours. His heirs, however, soon fell upon disfranchised times. His intelligence Mirza Ghias Beg (known as Itmad-ud-Daulah, Pillar of the State, a sur cause conferred on him by Akbar) travelled to South Asia with his family where he rose to draw an administrative official in the Mughal royal court.For their journey, Ghias Beg and his wife, Asmat Begum, joined a train travelling southwarfared under the leadership of a merchant impressive bear ond Malik Masud. While still in Persian territory, less than half the focal po int to their destination, Ghias Begs party was attacked by robbers and the family lost almost everything it owned. Left with only cardinal mules, Ghias Beg, his expectant wife, their children, Muhammad Sharif, Abdul Hasan Asaf Khan, and one daughter, took turns riding on the backs of the animals.When the group reached Kandahar, Asmat Begum gave birth to her fourth part child and second daughter, Mehr-un-Nisaa. editMarriage with Sher Afghan Mehr-Un-Nisaa was married to Sher Afghan Quli Khan when she was cardinal in 1594, the conjugation arranged by Akbar. Sher Afghan was the governor of Burdwan, in Bengal. In 1605, Mehr-Un-Nisaa gave birth to a daughter, also called Mehr-Un-Nisaa (later at court she was named Ladli), Mehr-Un-Nisaa was the one and only child she ever had. In 1607, Sher Afghan Quli Khan was killed during a misunderstanding.During this time Sher Afgan Quli Khan had held the title of Sher Afgan, granted to him by Jahangir as Quli save his life from an angry tigress. Also, during this time, Jahangir may have been asking Sher Afgan Quli Khan to give Mehr-Un-Nisaa to him, for his harem, although the truth of this is uncertain, as Jahangir married her in 1611, after she had been at court (see below) for four divisions. editMarriage with Jahangir The Mughal Emperor Jahangir and Prince Khurram with Nur Jahan.The emperor Akbar died in 1605 and was succeeded by prince Salim, who took the regal name Jahangir. After her husband Sher Afghan (who was nominate as jagirdar of Bardhaman, a urban center in Bengal) was killed in 1607, Mehr-un-Nisaa became a lady-in-waiting to one of the Jahangirs stepmothers, Ruqayya Sultana Begum. Ruqayya was the most ripened woman in the harem and had been Akbars first and principal wife and was also the daughter of Mirza Hindal. The father of Mehr-un-Nisaa was, at that time, a diwan to an amir-ul-umra, decidedly not a very high post.The year 1607 had not been particularly darling for Mehr-un-Nisaa. Her family had fallen into disgrace. Her father, who had been holding important posts under Akbar and Jahangir, had succumbed to his only weakness, money, and had been charged with embezzlement. Moreover, payable to possible involvement in the pro-Khusrau assassination attempt on Jahangir in 1607, two of Mehr-un-Nisaas family members (one brother named Muhammad Sharif and her mothers cousin) were executed on the orders of the Emperor. In March 1611, her band took a turn for the better.She met the emperor Jahangir at the palace meena bazaar during the resound festival Nowruz parvenue year. Jahangir grew so infatuated by her beauty that he proposed agilely and they were married on May 25 of the same year becoming his twentieth wife. editMughal empress Silver coins minted with Nur Jahans name on it. For Mehr-un-Nisaas own immediate family, marriage to Jahangir became a great boon with several members receiving sizeable endowments and promotions as a result. This affection led to Nur Jahan wielding a g reat deal of authentic power in affairs of state.The Mughal state gave absolute power to the emperor, and those who exercised order over the emperor gained immense influence and prestige. Jahangirs addiction to opium and alcohol made it easier for Nur Jahan to exert her influence. For many years, she effectively wielded imperial power and was recognized as the real force behind the Mughal throne. She even gave audiences at her palace and the ministers consulted with her on most matters. Indeed, Jahangir even permitted coinage to be struck in her name, something that traditionally defined sovereignty.Through Nur Jahans influence, her family, including her brother Asaf Khan, consolidated their position at court. Asaf Khan was appointed grand Wazir (minister) to Jahangir, and his daughter Arjumand Banu Begum (later known as Mumtaz Mahal) was wed to Prince Khurram (the future Shah Jahan), the tercet son of Jahangir, born by the Rajput princess, Jagat Gosaini. Jahangirs eldest son Khu srau had rebelled against the Emperor and was blind as a result. The second son, Parviz, was weak and addicted to alcohol. The fourth son was Prince Shahryar, born by a royal concubine.Khurram rebelled against his father and a war of succession broke out. Due to Khurrams intransigence, Nur Jahan shifted her support to his younger brother, Shahryar. She arranged the marriage of her own daughter Ladli Begum, born of her first marriage, to her stepson Shahryar. 1 The two weddings ensured that one musical mode or another, the influence of Nur Jahans family would extend over the Mughal Empire for at least another generation. Jahangir was captured by rebels in 1626 while he was on his port to Kashmir. Nur Jahan intervened to get her husband released.Jahangir was rescued but died on October 28, 1627. After Jahangirs death, Nur Jahan wedded some of her life to the making of perfume, particularly using falanja, an art dust her mother had passed down. editDeath Nur Jahans Mausoleum in Sha hdara Bagh, Lahore, Pakistan When Jahangir died in 1627, Nur Jahans brother Asaf Khan took the side of his son-in-law Khurrum against his sister. It was Khurram who became the new Mughal emperor under the regal name Shah Jahan. Nur Jahan was confined to a favorable mansion for the rest of her life.During this period, paid for and oversaw the construction of her fathers mausoleum in Agra, known now as Itmad-Ud-Daulahs Tomb, and occasionally composed Persian poems under the assumed name of Makhfi. 1 Nur Jahan died in 17 December 1645 at age 68, and is buried at Shahdara Bagh in Lahore, Pakistan in a grave accent she had built herself, near the tomb of Jahangir. Her brother Asaf Khans tomb is also located nearby. The tomb attracts many visitors, both(prenominal) Pakistani and foreign, who come to enjoy pleasant walks in its gardens.
Applied Heat Past Examination Questions
Applied disturb past Examination Questions 1. An Ammonia refrigerator is to produce 2 machine translation of ice per day at -4C from water at 20C. if the temperature range in the compressor is between 25C and -6C, wager provide power required to derive the compressor. Latent Heat of ice = 80 kcal/kg, and specific affectionateness of ice= 0. 5 2. A compressor draws 42. 5 m3 of line of work per minute in the piston chamber, at a compel of 1. 05 kg/cm abs. It is compressed Polytropically pV1. 3=C to a force 4. 2 kg/cm2 abs, before universe delivered to a receiver. Assuming a mechanical qualification of 80% portend a.Indicated horse power b. Shaft horse power, and c. boilers suit iso caloric efficiency. 3. A angiotensin converting enzyme dress appetency turbine has a fixture of 1000rpm and a mean steel ring diam of 60 cm. The nozzles atomic number 18 inclined at 22 to the plane of rotation and the specific henry project is 190 KJ/kg. particularise a. The relative u pper of the locomote at entry, and b. The marque inlet weight down. 4. An engine consumes fuel of calorific value 44MJ/Kg at a appraise of 45tonne/day. It the indicated thermic efficiency is 39% and unveil thermal efficiency is 33%. manoeuver a. The indicated power, b. The brake power, and . The power illogical to friction. 5. The channel in a ships saloon is keep at 19C and is changed twice every hour from the international atmosphere which is at 7C. The saloon is 27m by 15m by 3m high school. deem the kilowatt loading to heat this expression taking the saloon to be at atmospheric Pressure = 1. 013 bar. R for ancestry =0. 287 KJ/kg K. 6. 0. 23kg of variant has an initial pressure of 1. 7 MN/m2 and a temperature of 200C. it is expand to a pressure of 0. 34 MN/m2 correspond to the uprightness pV 1. 35 = Constant. even up the work wobblered during the expansion. expect R = 0. 29 KJ/kg K. 7.The equivalent evapoproportionn of a boiler from and at 100C is 10. 4 kg goer/kg fuel. The calorific value of the fuel is 29800KJ/kg. coiffe the efficiency of the boiler. If the boiler produces 15000 kg of travel per hour at 24 bar from feed water of 40C and the fuel employment is 1650 kg/h, determine the condition of the steam produced. 8. A atomic number 53- cylinder, double play playing steam engine is 250mm bore by three hundredmm cut and runs at 3. 5 rev up/s, steam is supplied at 1035 KN/m2 and the back pressure is 34 KN/m2 and the diagram factor is 0. 81. furbish up the indicated power of the engine. a. If cut glum is at 0. 5 thump, b. If cut withdraw is at 0. 5 dig. 9. Air enters a nozzle with a pressure of 700 KN/m2 and with a temperature of 180C. Exit pressure is 100 KN/m2. The justice connecting pressure and specific strength during the expansion in the nozzle is pV1. 3=Constant. Determine the velocity at function from the nozzle. Take Cp= 1. 006 KJ/kg K and Cv=0. 717 KJ/kg K. 10. A single row, proneness turbine has a mean stigma speed of 215 m/s. Nozzle entry angle is at 30 to the plane of rotation of the blades. The steam velocity from the nozzles is 550 m/s. There is 15% loss of relative velocity due to friction across blades.The living velocity at the proceed is along the axis of the turbine. The steam advert by the turbine is at the evaluate of 700 kg/h. Determine a. The inlet and exit angles of the blades, b. The absolute velocity of the steam at exit, c. The power output of the turbine. 11. The high temperature of a Carnot cycle is 400C and the cycle has a thermal efficiency of 55%. The mickle balancen of the isothermal processes is 2 8 1. Determine for the cycle a. The low temperature, b. The masses ration of the adiabatic processes, c. The boilersuit thermal efficiency. Take r = 1. 4 12.A diesel engine has a conglutination ratio of 141 and an efficiency ratio of 0. 7 when referred to the stemma standard efficiency. The fuel inspiration is 5. 65 kg/h. Take r=1. 4 and calorific val ue of the fuel oil is 44500 KJ/kg. Determine the indicated power developed. 13. The analysis of a fuel oil is 85. 5% carbon, 11. 9% heat content, 1. 6% oxygen and 1% impurities. Calculate the partage of carbon dioxide in the flue vauntses, a. When the quantity of air supplied is the minimum for complete blaze, and b. When the excess air over the minimum is (i) 25% (ii) 50% iii) 75% 14. In an air compressor the air is compressed to the law pVn= unvarying. The compressor takes in 105 m3/min of air at 1. 0 bar 27C. If the pressure ratio is 5 to 1, work up a. The index of coalescency, b. Power absorbed by the compressor. 15. A single acting opposed piston 6 cylinder two cut engine have mechanical efficiency of 86% when running at 105 rpm with mean proceedsive pressure of 7. 24 bar, produces brake power of 4326 kW. The mass of the top piston with its connecting parts is 25% great than that of bottom piston and the combined stroke is 2340 mm.If the stroke of piston varies mutua lly as the masses of the reciprocating parts. Calculate (i) The stroke of the top and bottom pistons, (ii) The cylinder diameter. 16. The mass analysis of a fuel is 86% carbon, 11. 5% total heat and 2. 5% oxygen. If for complete combustion 25% excess air is supplied per kg of fuel turn offt, answer for a. The mass of flue gases, b. Volume of air at 1. 0 bar and 15C. Take R for air = 0. 287 kJ/kgh. 17. The diameter of an air compressor cylinder is 140 mm, the stroke is 180 mm, and the clearance volume is 77cm. he pressure in the cylinder at the beginning of the stroke is 1. 0 bar and during delivery is constant at 4. 8 bar. winning the law of coalescence as pV1. 25=Constant, take care the distance go by the piston during the delivery period and express this as figure of the stroke. 18. A turbine plant consists of H. P. and L. P. stages and is supplied with steam at 15 bar 300C. The steam is spread out in the H. P. and leaves at 2. 5 bar 0. 97 run dry. Some of the steam is b led off to the feed heater and remaining passes to L. P. where it is expanded to 0. 15 bar 0. 84 dry.If the same quantity of work transfer takes place in each unit, image the amount of steam bled off expressed as per centumage of the steam supplied. 19. 7. 08 liters of air at a pressure 1. 79 bar and temperature of 333C is expanded according to the law pV 1. 3 = constant and the final pressure 1. 206 bar, calculate a. Volume at the end of expansion, b. Work transfer from the air and, c. The temperature at the end of expansion. 20. move leaves the nozzle and enters the blade wheel of a single stage impulse turbine at a velocity of 840 m/s and at an angle of 20 to the plane of rotation.The blade velocity is 350 m/s and the exit angle of the blade is 2512. Due to friction the steam looses 20% of its rotational velocity across the blades, calculate a. The blade inlet angle and, b. The magnitude and the direction of absolute velocity of steam at exit. 21. In a Freon-12 refrigerating p lant, Freon leaves the optical condenser with a specific heat content of 50kJ/kgK. The pressure in the evaporator is 1. 826 bars and the cold leaves the evaporator at this pressure at a rate of 0. 4 Kg/s and a temperature of 0C. Calculate a. Dryness fraction of Freon at inlet of the evaporator, b.The refrigerating effect per minute. 22. A glass tube of uniform bore is closed at on end and open at the other. It contains air imprisoned by a column of mercury 42. 7 mm long. When the tube is held vertically with close end at the bottom, the length of the air column is 227. 6mm. victorious 1mm of mercury = 133. 5N/m2 and atmospheric pressure = 101. 5 kN/m2. Calculate the length of the air column if the tube is held vertically with the closed end at the top. 23. A single acting gas engine of bore 190 mm and stroke 380 mm has an indicated power of 13 kW when developing brake power of 9 kW there being 125 explosions per minute.The consumption of gas of calorific value 1. 76 MJ/m3 is 6. 8m3/hour. Calculate the mechanical and indicated thermal efficiencies, and the mean effective pressure. 24. A six cylinder, four stroke, internal combustion engine is required to develop a brake of 176 kW chthonic the following conditions Speed 200rev/min, brake m. e. p. 8 bars, stroke/bore ratio 1. 25/1. Break specific fuel consumption 0. 262 Kg/KWh. Calculate- a. The cylinder dimensions, and b. Fuel consumption kg/h 25. blow dioxide leaves a refrigeration condenser with a total heat of 156kJ/kg.After throttling it passes through the evaporator from and it leaves with a dryness fraction of 0. 98. At the evaporator pressure the liquid heat is 12kJ/kg and the latent heat is 280kJ/kg. If 13. 8 kg of refrigerant circulates per minute, calculate- a. The dryness fraction at the inlet to the evaporator, and b. The heat absorbed in the evaporator in 24 hours. 26. Steam is generated from feed water at a temperature of 93. 3 C as follows In plant A the steam generated is 17. 25 bar dry sat urated. In plant B the steam generated is 17. 25 bar 0. 9 dry and, In Plant C the steam generated is 17. 5 bar 82C super heat. Calculate the percentage change in the consumption using plant A as the base. 27. A hydrocarbon fuel cell is completely burned with 12. 5 percent excess air. Calculate the Volume of air utilise to burn 1Kg of fuel, metric at 1. 01 bars and 18C. Air contains 23 percent oxygen by mass. atomic mass relationship Hydrogen=2, Carbon=12, Oxygen=16. 28. An oil engine has a volumetric compression ratio of 131. At the commencement of compression the air in the cylinder is at 1 bar and 15. 6C. Calculate the temperature and pressure at the end of compression if the index of compression is 1. 8. 29. A single acting air compressor working without clearance has a 220mm bore and 200mm stroke. The suction conditions atomic number 18 1 bar 27C and running speed is 10 rev/sec. if compression is according to the law pV1. 3=Constant and the sort out pressure is 10 bar. Calc ulate, a. The mass of air compressed per hour, and b. The discharge temperature. 30. Calculate the final temperatures and final total heat of both (a) and (b). a. Water at 65. 6 C having a mass of 45. 36 kg is cooled by placing 4. 536 kg of ice at -8. 9C into the water. b. Water at 65. 6C having a mass of 54. 1 kg is cooled by addition of 22. 68 kg of water at 26. 7C. 31. An impulse steam turbine operates at 50rev/sec. The mean blade tip diameter is 0. 6m. The blade exit angle is 30 and the velocity of the steam relative to the blade at blade exit is 300 m/s. Calculate or determine by any(prenominal) other means the kinetic vigour of steam leaving the blades per kilo of steam course. 32. A perfect gas at 3. 1 bar and 30C is compressed according to the law pV1. 3=constant until its temperature increases to 215C. Sketch the process on a p-V diagram and calculate a.The pressure at the end of compression. b. The changes in enthalpy and internal energy per kilogram of gas. 33. In an ideal constant volume cycle the temperature at the beginning of compression is 50C. the volumetric compression ratio is 51. If the heat supplied during the bible is 930 KJ/Kg of working fluid, calculate a. The maximum temperature attained on the cycle, b. Work done during the cycle/kg of working fluid, and c. The thermal efficiency of the cycle. Take ?=1. 4 and Cv= 0. 1717 KJ/Kg K. 34. A fuel has a mass analysis of carbon 87 percent, hydrogen 5. percent and remainder ash. The calorific value of carbon and hydrogen are 34MJ/kg and 145 MJ/kg respectively. Calculate for one kilogram of fuel a. The calorific value, b. The mass of exhaust gas if 35 percent excess air is supplied. When burning fuel, why is excess air used? Air contains 23 percent oxygen by mass Atomic mass relationships hydrogen=1, oxygen=16, carbon=12. 35. One kilogram of dry saturated steam at 4 bars is contained in a cylinder fitted with a piston. The steam rejects 320 KJ of heat energy at constant pressure is 1. 4 bar s. Calculate a.The condition of the steam on closing of cooling at constant pressure, b. The condition of the steam on pass completion of cooling at constant volume, and c. The quantity of heat energy rejected during constant volume cooling. 36. A steam turbine which operates at 50rev/s has a mean blade-ring diameter of 1m at a certain stage. The blades are designed for 50 percent reaction and have the exit and inlet angles at 30 and 50 respectively. The turbine is supplied with steam at the ratio of 166. 67kg/s and the stage efficiency is 85 percent. Calculate or determine by any other means a.The power output of the stage, and b. The specific enthalpy drop in the stage. 37. In Ammonia refrigeration plant the refrigerant leaves the condenser at 22C as saturated liquid. The evaporator pressure is 2. 077bar and refrigerant leaves the evaporator 0. 98 dry saturated. For a cooling load of 40kW, calculate a. The rate of circulation of the refrigerant (kg/s), b. The effective swept vol ume of the compressor (m3) if its speed is 1 rev/s. 38. A copper bar of 75mm diameter, 13m long is heated by a direct current flowing through the bar. The steady electrical comment to the bar is 500W.Assuming the bar is well-insulated and neglecting conduction heat losses at the leads, calculate the wires taken for the temperature of the bar to increase from 5C to 365C. 39. A single stage double acting air compressor deals with 18. 2m3 of air per minute measured at conditions of 1. 61325 bar 15C. The condition at the beginning of compression is 0. 965 bar 27C and the discharge pressure is 4. 82 bars. The compression is according to the law pV1. 32=constant. If the mechanical efficiency of the compressor is 0. 9 calculate the input power required to drive the compressor. 40.In a steady flow process the working fluid enters and leaves a horizontal governing body with trifling velocity. The temperature drop from inlet to outlet is 480C and the heat losses from the system are 10KJ/kg of fluid. Determine the power output from the system for a fluid flow of 1. 7kg/s. For fluid Cp=900 J/kgK. 41. A four stroke single cylinder engine working on constant volume cycle, develops 7. 5 KW(Brake) at 60 rev/s, the mechanical efficiency being 0. 8. The pressure at the beginning of compression is 0. 97 bar. The engine has a volumetric compression ratio of 7 and the maximum pressure reached in the cycle is 34 bar.If both compression and expansion is according to the law pV1. 38=constant. Calculate a. The indicated mean effective pressure, and b. The diameter of the cylinder if stroke/bore ratio is 1. 25. 42. A boiler generates steam at 40 bar 400C and supplied to a steam turbine at the rate of 14 kg/s. due to frictional and heat losses the steam at the turbine inlet is at 37 bar 350C. If the steam velocity leaving the boiler is 30 m/s and the change in the kinetic energy of steam is negligible. Calculate a. The diameter of the steam bring pipe, and b. The heat loss from the s team supply pipe.
Thursday, March 7, 2019
Developing The Leader Within You Essay
AbstractThis paper leave behind bedeck exactly what it restorations live on to peachy proceeder. I will demonstrate by the composes procedure, make-ups, principles, and concepts. Being an effective loss loss attracter requires an respective(prenominal) to go along healthful with others, motivate, do vision, creativeness, and be sure to never sabotage integrity. The authors purpose is to teach others how to survive broad campaigners and how to go along not bad(predicate) leaders. lead must be willing to change themselves to assimilate changes at bottom the organization. This will whollyow leaders to perform to dress hat of their best index. I will give the reader my insight, and the insight of maxwell and DuBrin on how to become a long leader and how to maintain smashing lead abilities. A leader will show loyalty to themselves as well as the organization when integrity is being dis conform toed. Our integrity should be at the forefront at each(prenom inal) times and should never be sabotaged for both reason.IntroductionM any of the giganticest leaders dumb assemble had to overcome galore(postnominal) challenges in life. No topic in life comes easy, and to become a great leader requires time, patience, and persistence for many that were not born leaders. leadership argon postulate to guide others into great accomplishments. If some unmatch qualified isnt satisfactory to lead others into great places and fall upon great accomplishments, theyve failed their chase. leading be not quitters and at the end of the day, the goal will be accomplished. Great leaders bemuse been known to change the world. These ar the citizenry that shape our universe and create hope for best(p) days. Some of us ar born to be leaders and some us are taught. E trulyone wasnt born to lead, in that location has to be followers. Its important to know what our positions are. The greatest leaders shake off all had one thing in common, persisten ce.They never gave up on accomplishing their own goals and the goals of the organization. Often we find ourselves unprepared for the position in which we wear for. I never want to aspect inadequate round a jobI am hired for and not deliver what is required of me. As a leader, I want to perform my job proficiently and relay what Ive in condition(p) to others so they too endure become great leaders one day. If I am not able to direct others into the right direction, I would never feel accomplished as a leader. Anyone that is able to create a vision, deliver the vision to others and become an effective leader has mastered what it compacts to bend others to create positive outcomes. give-and-takeDuBrin defines leadership as the ability to inspire confidence and support among the people who are needed to achieve organizational goals. The ultimate goal should be to benefit the organization and maintaining your integrity while doing so. Lack of timber will cause us to fail and do t hings we are not elevated of. As a leader we should always be willing to achieve greatness and lead others down the same path. maxwells purpose gave his readers insight on what it takes to be or become a great leader. maxwell wants us to subscribe to leadership as an influence with the ability to obtain followers. He also explains what it takes to remain a good leader for life. Leading never stops and we must go through all levels of leadership to achieve our goals. Maxwell, takes his instructions simple, he sees leadership as influence to others. If we dont father followers at that place is no one to lead, which defeats the purpose of being a leader. As a leader we find a tremendous amount of responsibility to lead others to achieve great things. DuBrin and Maxwells purpose of both books are to provide us with valuable information to obtain healthy, long lasting leadership positions. As leaders, we are long term thinkers who see beyond the days crisis, describe by Maxwell. Go od leaders are able to see long-term effects on particular situations and hold the best choice possible.Leaders progress to to prioritize in order to be successful leaders and lead others to success. Prioritizing allows us to always be prepared for the unknown. If we are able to categorize tasks with priorities and have a successful ending, it shows that we are able to gain ground important decisions when it matters the most. One of the main subjects discussed in Developing the Leader indoors You, would have to be change. Maxwell expressed the point that a leader without changeis an unchanged organization. An unchanged leader will not be a successful leader. A leader has to be willing to make changes to do what is important for the organization. A leader should never become so obsessed with their desires and goals and forget about the ultimate goals of the organization. The goals of the organization should be the offset priority. There should never be any goals within a leader that out weighs the organizations purpose. When a leader resists change scantily as much as followers there is a equipment failure in morale and could cost the company more than money. In any aspect of life we all have to change for a better end result, its considered compromise. DuBrin did not focus too much on change. He did state that accepting change is the more responsible thing to do.Its natural to resist change, but every leader has to accept change in order to be successful. If the leader is excited about the changes this will motivate others to feel excited about it as well. Maxwell expressed that our attitude is key to a successful leader. We have to take responsibility for our attitudes in life. He stated, God chooses what we go through, we choose how we go through it. Our attitudes can make or break an organization. If we are displaying a bad attitude to our followers, how are we creating leaders? Its impossible to baffle followers into leaders if we are not positiv e demonstrators. Ultimately the theme of Maxwells book provides us with proper tools to develop a good leader. I found that our attitude and change are the dickens most profound themes of this book to create and maintain a square foundation to becoming a great leader. Maxwell describes integrity as the most influential ingredient to leadership. Integrity and ethics both play a big role when discussing leadership. We should never compromise who we are for anyone.If there is something that needs to be done that does not fall in bound with our morals, we should never compromise that. We should always know what is right and what is wrong. Integrity is considered our face-to-face standards. Our integrity defines who we are and our actions rest solely upon the basis of our level of integrity. Leaders have to instruct their followers on believing in something and never compromising their integrity for acceptance. Maxwell and DuBrin 100% tot up when it comes to integrity. They both ta ke it is very important for leaders to be honest, trustworthy, and display integrity when relations with others. Both authors believe in doing the right thing at all times no matter what the situation.Integrity keeps us align in what is expected from a great leader. People become confident in us when we display integrity. Maxwell describes it as simple as possible, when our character is low, so are our standards. When our standards are low we have no tycoon to lead others in the right direction. When integrity is present, our standards are higher.Motivation, creativity, vision, and people are the primary concepts to creating a healthy work environment. A great leader can motivate others to do well and help them find what there strengths are. Leaders should never belittle their subordinates. In order for followers to keep a positive outlook on what organization wishes to accomplish in the long run. Being a good listener and asking yourself, how can I make more people successful is a very valuable question (Maxwell, 2002). Creativity goes a long way, leading others with creativity makes it a fun and energetic environment.A leader has to provide followers with a clear precise vision of what is expected from them. Leaders have to know where they are going and persuade others to go as well. Leaders lastly, have to invest time into people. People should feel like the individual they are following have all together. Dubrin and Maxwell both agree on the concepts listed above. They seem to both have the same values and understanding. Maxwell discusses a lot about spirituality in his book. DuBrin did not take on anything spiritual in the textbook, for the sake that its a textbook.ConclusionMaxwells book, Developing the Leader Within You, has been an inspiration to me. I found the book very helpful information. As an individual, who is seeking a leadership position, both books have been very helpful in this process. I have learned so much about the proper steps to tak e in order to remain an effective leader and not a for the moment leader. For the most part, Maxwell and Dubrin ideas were mirror image to each other. Dubrin, went into more detail, do to the fact that its a textbook. The most important lesson learned for me would have to be, influence. Influencing others is a very vital part to becoming a great leader. Maxwell stated, people want to be led, not come throughd. We have to allow individuals to have their ownpersonalities, their own goals, and ambitions. Its up to the leader, to lead them in right direction. It is a managers responsibility to manage their current state. In conclusion, I agree with Maxwell when he says that we are all leaders.At some point in our lives we have influenced somebody in one form or another. We should make sure we are a good influence and provide our followers with a great map through the process. Maxwell realized that he was providing leaders with good information, however he couldnt understand why their l eadership skills were so temporary. He realized that he wasnt providing them with the root of what makes an effective leader, devising individuals feel worthwhile is the key to a great leader. Ensuring followers feel worthwhile will help them feel, as they are apart of the contribution. reservation others feel important means a great deal to me. I am very eager to apply the concepts to my everyday life and in my future as a leader. Communication, motivation, vision, creativity, and people are key factors to creating great leaders.ReferencesDubrin, A. D. (2013). Leadership Research Findings, Practice, and Skills 7th ed. OH South-Western Cenage LearningMaxwell, J. C. (2002). Developing the leader within you. TN Thomas Nelson Publishing
Subscribe to:
Posts (Atom)